Axial / PCB Resistors
Power resistors
- Danotherm
- / Power resistors
- / Self cooled
- / Axial resistors
Salient features
- Power 2 - 15W
- Overload factor [email protected]
- Tolerance ± 5% (on reqeust up to ± 1%)
- Protection degree IP00
- Ohmic range E24 series (0R01 - 82kR)
- Natural air cooled
Datasheet
Description
CS and SR resistors are axial wirewound ceramic resistors with a silicone based coating. The nominal power ranges from 2 till 15W. They are used in a wide variety of applications. Standard tolerance is 5%. Available on request is 1%. CS and SR resistors follow the E24 Ohmic values series. Small quantities are mostly available from stock for fast prototyping. SR types are ideally suited for mounting directly on capacitors for voltage sharing.
Salient features
- Power 1 / 1.2 / 2.4W
- Tolerance ± 5%
- Protection degree IP00
- Ohmic range 5mR - 160mR
- Natural air cooled
Datasheet
Description
Modulohm resistors are typically used as shunt for current measuring circuits. The are available in three power ratings; 1, 1.2 and 2.4W and have fixed Ohmic values. Modulohm resistors are offered in bags of 100 or 1000 pieces.
Salient features
- Power 6-100W (natural air cooled)
- Increased power heatsink cooled
- Overload factor 5xPn @ 5s
- Dielectric insulation voltage (50Hz, 1 min) 1500-4500V
- Cooling method heatsink / natural air
- Ohmic range series E24 (10mR-120kR)
- Protection degree IP00
- Working Voltage 265-2300V
Datasheets
Description
Extruded aluminium housing provides superior heat conduction. Housing deep finned for maximum heat dissipation at natural or forced air convection. Gold anodized finish for maximum resistance to environmental conditions. Special thermosetting compound with high thermal conductivity. Winding designed to give maximum core coverage and uniformity for even heat dissipation. Core centerless ground for maximum winding uniformity. Marking at top surface for easy identification after mounting. Complete welded construction terminal to terminal.
